- GEE FIX IR 4010
GEE FIX IR 4010
ACRYLIC WATER PROOF COATING
GEE FIX IR 4010 is a specially formulated single pack high quality, water proof coatings made from selected resin, special tackifying agent and additive. It has outstanding durability and resistance to weathering.
GEE FIX IR 4010 is high quality water proofer to most type of roof Eg. Concrete metal asbestos etc. Also recommended for water proofing of plaza and car park decks and other vulnerable exposed surface in water porn system. GEE FIX IR 4010 also provides protective membrane for PU installation.
Surface should be free off Oil, Grease and loose particles. Cark should be repair with G SEAL.
Apply primer coat of diluted GEE FIX IR 4010 (i.e. 75 part by weight of GEE FIX IR 4010 25 part by weight of water) by brush, spray or roller. After the primer coat is completely dried, apply minimum two coat of undiluted GEE FIX IR 4010. it is very important to ensure each coat is totally cured (i.e. 8 hrs at 30 degree centigrade) before the next coat is applied for better result used glass fibre reinforcing mat embedded into first coat of GEE FIX IR 4010 while still wet mainly at expansion areas and joint with parapet. All brushes and tools should be cleaned by water immediately after use.
GEE FIX IR 4010 available in 15 kg., 20 kg., and 25 kg. plastic buckets.
GEE FIX IR 4010 store under cover and preferably below 30 degree centigrade. Shelf life maximum 12 months in unopened container
Easily cleaned away with moist cloth. When dried, clean with commercial solvent.